+ 1-888-918-1764 Fix TP-Link not connecting to the Internet |

0

Every possible cause of TP-Link not connecting to the internet

Even though everything looks fine, the lack of internet connection on the device can be a horrible situation. You need to understand the reason for this so that you can easily fix the connectivity issue. Let’s take a closer look at why TP-Link is not working or connecting to the internet.

Powerful solutions to fix TP-Link unable to connect to internet issue

You may have successfully installed the wireless router and fully connected to your wireless network. However, you still cannot access the internet. It is a serious problem that must be resolved in a minute. Below is a list of several successful solutions that you can implement anytime you want to eliminate TP-Link router not working issue. Let’s try to implement the given solution techniques one by one until the router starts working.

Solution 1: Check the physical connection established

The first step you need to take is to check the router and TP-link modem carefully. Make sure the devices are well connected to each other. If the warning message “The WAN port is disconnected” appears, it means that the modem is not connected to the WAN port of the router.

Plug the modem cable into the WAN port and see if the same error message still appears. If the message disappeared, that would be great! Your TP-link router can now connect to the internet and start working. Otherwise, skip to the next visual guide.

Solution 2: clone the Mac address of the computer

When establishing a network connection for the first time, some Internet service providers register your computer’s Mac address. If the Mac address has been changed recently, the ISP will accept the router for a smooth internet connection. That is why it is very important to clone the Mac address of a computer system. Here are the step-by-step instructions to clone the Mac address of a computer:

First of all, you need to make sure your computer is properly connected to the TP-Link router.

Now go to management and click on the “Network” tab.

Now in the next step, you need to go to the “Mac Clone” option listed on the left.

After that, select “Clone Mac Address”. This function will clone your computer’s Mac address, making it the WAN MAC address of your router.

If it doesn’t work when troubleshooting TP-Link router no internet access issue, calm down! There is another solution guide for your reference. Try it now!

Solution 3: reset the router IP address

Usually, the default IP address of TP-Link router is 192.168.0.1 or 192.168.1.1. This may conflict with the current range of your router, so the device will not be able to communicate with your modem. This will be the main reason why you cannot connect to the internet. Therefore, at some point, you need to change the router’s LAN IP address from 192.168.1.1 to 192.168.2.1. Let’s follow the TP-Link troubleshooting steps to change the router IP address in one minute:

First, click on “Network” and then navigate to the “Local Network” tab that appears on the left side of the menu.

If after successfully resetting your TP-Link router, the device is connected to the internet, great! However, if this does not happen, then try using the next repair guide to fix the TP-Link router not working issue.

Solution 4: Restart the router and modem

This is a complete action plan that you must take to restart your router and modem. After performing this operation, the router can be connected to the Internet. Therefore, let’s immediately start performing the following steps:

First of all, you need to completely turn off the router and the TP-Link modem.

Now keep them closed for a few minutes.

Then turn the router back on.

Wait a minute or a little, then turn the modem back on.

Check, wait and make sure the Internet light is on.

Wait a few more seconds and then check if the internet connection is established.

If this does not help you solve the TP-Link not connecting to the internet issue, please proceed to the next solution.

Solution 5: Check the type of WAN connection

Here’s how to check the connection type:

First, select the “WAN connection type” of the router.

In addition, you can consult your Internet service provider to obtain a suitable type of connection.

Now select “Network” and click on the “WAN” tab displayed on the left side of the menu.

Now configure the exact WAN connection type and click the “Save” button.

After that restart the router and modem again.

Now you can check if TP-Link is connected to the internet.

There might be a problem with your ISP.

If the TP-Link router is connected via LAN, the cable may not be inserted correctly and the connection may be loose.

If the network configuration is incorrect, TP-Link may not be able to connect to the internet.

Loose connections between modem and router are also one of the reasons that connection issues do not occur.

If the router’s IP address is not set correctly on your system.

Share.

Comments are closed.